High Pressure Fireproof Hose Manufacturer
Pubdate: 2023-09-18 14:31 | Hits:
High Pressure Fireproof Hose Manufacturer:（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Fireproof Hose Assembly Introduction:
High-pressure refractory hose is useful in marble, jade, stone, quartz, stone powder, stone rolling plant, water plant, rosin refinery, yeast plant, mirror factory, etc., involving towel products manufacturing; Sugar industry; Nuclear fuel processing; Tire manufacturing; And so many industries. Improper selection of the clamping amount and clamping speed during the assembly of the hose and the joint, or unreasonable selection of the structure, material and size of the joint, can lead to too tight or too loose pressure of the hose and the joint, resulting in early damage to the joint. The extruder is again coated with the outer layer of rubber, and then wrapped with lead or cloth vulcanization protective layer. Vulcanization by canister or salt bath. High pressure hose often have these types: fiber reinforced polyurethane hose, fiber reinforced nylon hose, wire reinforced polyurethane hose, wire reinforced nylon hose, wire wound resin hose, food grade hose. The failure of the strengthening layer is mainly due to the effect of wet or corrosive substances on the layer, which weakens the strength of the hose and leads to rupture at high pressure.
High Pressure Fireproof Hose Assembly Model:
High Pressure Fireproof Hose Assembly Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Fireproof Hose Assembly Factory:
Hebei Tengshuo company sales high pressure refractory hose, steel armouring high pressure hose, cement grouting high pressure hose, automotive high pressure hose, wire wound high pressure hose, enhanced braid high pressure hose, to meet the needs of users.
High Pressure Fireproof Hose Assembly FAQs:
What does the high pressure hose joint form H1101 mean?
High tubing joints have a, d, c, b, f, g, h,k, which are commonly used; Among them, various joints are divided into direct, 90 degree bending and 120 degree bending, a type is a plane sealing type, d is a spherical sealing type, generally used with c type, c type score 24.60. And 74 degrees; Matched with 24 degree g type, type and 74 degree g type in turn; Type b is a jacketed joint that matches type c at 24 degrees.
What kind of high pressure hose is good?
The inner and outer layers of the high pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) cross-braided steel wire or wound steel wire. Poor quality hose will appear: uneven wall thickness of the rubber tube; The wire braid is too tight, too loose or the number of wire layers is too few; The amount of deformation (elongation, shortening or bending deformation) of the hose after pressure is large; Poor outer rubber air tightness leads to corrosion of steel wire; The poor sealing of the inner layer makes the high pressure oil easily enter the wire layer; Adhesive layer and wire layer adhesion is insufficient. The above conditions will reduce the bearing capacity of the hose, and eventually burst at the weak point of the pipe wall.
