High Pressure Spiral Hose
Pubdate：2023-09-26 16:17 | Hits：
High Pressure Spiral Hose:（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Spiral Hose Introduction:
High pressure winding hose is useful in washing and dyeing factory, titanium dioxide factory, sofa factory, talc factory, bakelite powder factory, etc., involving nickel and cobalt smelting; Supply instrument and general instrument manufacturing; Insulation products manufacturing; Wind power generation; And so many industries. The structure of high pressure steel wire braided hose is mainly composed of liquid resistant synthetic rubber inner layer, middle rubber layer, Ⅰ, Ⅱ, Ⅲ layer of steel wire braided layer and weather-resistant synthetic rubber outer layer. The main reason for this phenomenon is that the system pressure is too high, exceeding the pressure resistance of the hose. The automatic hydraulic system transmits petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) with a certain pressure and temperature, and liquid transmission. The high pressure hose has the characteristics of small bending radius, the minimum burst pressure of various hoses is 3 times the working pressure, and the performance of temperature and pressure resistance is excellent. The outer rubber layer of the hose is seriously deteriorated. In this case, the hose should be replaced.
High Pressure Spiral Hose Model:
High Pressure Spiral Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Spiral Hose Factory:
The company specializes in the distribution of high pressure winding hose, hydraulic equipment special high pressure hose, hanging high pressure hose, air compressor high pressure hose, anti-static high pressure oil resistant hose, German standard high pressure hose.
High Pressure Spiral Hose FAQs:
What is the difference between steel wire high pressure hose and ordinary high pressure hose?
The high pressure hose has braided and wound, in general, the pressure is a little bit smaller, and the higher one is wound. More than 3 layers are wound, and are mostly used for conveying petroleum-based liquids (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquids (such as emulsion, oil-water emulsion, water) with a certain pressure (higher pressure) and temperature, and liquid transmission, the maximum working pressure can reach 70-120Mpa.
What are the specifications and models of SAE series high pressure hose?
"Below to give you a simple talk about the SAE series of American standard high-pressure hose specifications and models, the specific specifications of the parameters, you can go to the Qianli hose company website to see. 1, SAE100 R1 (a layer of wire braided hose) 2, SAE100 R2 (two layers of wire braided hose) 3, SAE100 R3(two layers of wire braided rubber hose) 4.SAE100 R4 (fabric reinforced clip wire suction resistant tubing) 5.SAE100 R5 (inner layer of wire braided, outer layer of wire braided, Oil resistant rubber tube) 6.SAE100 R6 (one layer braided rubber tube)
