Petroleum High Pressure Anti-corrosion Hose
Pubdate：2023-10-17 14:46 | Hits：
Petroleum High Pressure Anti-corrosion Hose Specification:（Guide：Introduction→Model→Price→Factory→FAQs）
Petroleum High Pressure Anti-corrosion Hose Introduction:
Oil high-pressure anti-corrosion hose is useful in oil extraction plants, emery cloth factories, lifting machinery factories, corduroy factories, rain cloth factories (except paint cloth, rubber cloth), etc., involving starch and starch products manufacturing; Audio equipment manufacturing; Coking; Manufacturing of household ventilation electrical appliances; And so many industries. Under the premise of guaranteed quality, if used improperly, it will greatly shorten the service life of the hose. In actual work, most of the high pressure hose ground damage is caused by improper use. The inner and outer layers of the high pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) cross-braided steel wire or wound steel wire. Some special high pressure hoses, in order to meet user requirements, have smooth appearance, small bending radius, wear resistance, easy bending, easy installation, resistance to many chemical corrosion, smooth inner wall, small resistance, fluid flow, the minimum burst pressure of various hoses is 3 times the working pressure, temperature resistance -40°~+120°. Sorting wire wound hose Wire braided hose oil drilling hose. The higher the temperature of the oil, the easier the rubber is to age, the worse the elasticity, the lower the strength and sealing performance, and the hose will soon burst.
Petroleum High Pressure Anti-corrosion Hose Model:
Petroleum High Pressure Anti-corrosion Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Petroleum High Pressure Anti-corrosion Hose Factory:
The factory operates oil high pressure anti-corrosion hose, high pressure car wash supporting hose, hydraulic equipment special high pressure hose, dn13 high pressure hose, wire wound high pressure hose, high pressure mining hydraulic hose, complete models, support custom.
Petroleum High Pressure Anti-corrosion Hose FAQs:
What effect may the amount of pressure have on the use of high pressure hose?
When the high and low pressure hose is pressed, it will always produce the phenomenon of too tight or too loose, which will cause the quality of the high and low pressure hose to be affected. During assembly, if the amount of pressure is too small, that is, when the pressure between the joint and the high and low pressure hose is too loose, the high and low pressure hose may slip out of the joint in the early stage of use under the action of oil pressure; If the amount of pressure is too large, the joint and the hose are too tight, which can easily lead to local damage to the inner layer of the hose, resulting in cracks, the high-pressure tubing will directly enter the steel wire layer from the rupture, and then squirt out the tail of the jacket along the gap between the steel wire, or have been along the steel wire layer to a place to accumulate, so that the outer layer of rubber bulge.
