Petroleum High Pressure Hose
Pubdate：2023-10-17 17:21 | Hits：
Petroleum High Pressure Hose Specification:（Guide：Introduction→Model→Price→Factory→FAQs）
Petroleum High Pressure Hose Introduction:
Oil high-pressure hose is useful in Chinese medicine cutting paste pill manufacturing plant, foam glue factory, socks factory, plexiglass product factory, microbial factory, etc., involving the manufacture of special equipment for oil drilling and production; Nuclear radiation processing; Manufacture of jewellery and related articles; Silver smelting; And so many industries. It is reported that domestic manufacturers have produced, and tested by more than a dozen coal mines, can replace similar imported products. Unreasonable joint design and poor processing quality will also cause damage to the inner adhesive. If the joint material is not selected properly, it is easy to deform during the clamping process, which affects the clamping quality and shortens the life of the hose. If the amount of pressure is too large, the joint and the hose are too tight, which can easily lead to local damage to the inner layer of the hose, resulting in cracks, and the high-pressure oil will enter the wire layer directly from the rupture, and then squirt out to the tail of the jacket along the gap between the wires. The stiffening layer of the hose is not rusted, but the stiffening layer is irregularly broken. Oil drilling hose structure: inner rubber layer, inner rubber protective layer, medium rubber layer, wire winding layer and outer rubber layer.
Petroleum High Pressure Hose Model:
Petroleum High Pressure Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Petroleum High Pressure Hose Factory:
Our company produces oil high pressure hose, steel wire textile winding high pressure hose, cement grouting high pressure hose, wet spray machine high pressure hose, high temperature high pressure hose, dn13 high pressure hose, and strive to meet the needs of users.
Petroleum High Pressure Hose FAQs:
Hose working conditions WP20bar,BP.60bar What does it mean?
It indicates that the maximum working pressure of the hose is 20bar (2MPA, 20kg) and the minimum blasting pressure is 60bar (6MPA, 60kg). Rubber hose is a kind of tubular rubber products used to transport gas, liquid, slurry or granular materials. It is composed of an inner and outer rubber layer and a skeleton layer, and the material of the skeleton layer can be cotton fiber, various synthetic fibers, carbon fiber or asbestos, steel wire, etc. The inner and outer rubber layer material of the general rubber hose is natural rubber, styrene butadiene rubber or butadiene rubber; Oil resistant hose adopts neoprene rubber, nitrile rubber; Acid and alkali resistant, high temperature resistant hose using ethylene propylene rubber, fluorine rubber or silicone rubber.
