Hydraulic Support High Pressure Hose
Pubdate：2023-09-26 12:47 | Hits：
Hydraulic Support High Pressure Hose Specifictions:（Guide：Introduction→Model→Price→Factory→FAQs）
Hydraulic Support High Pressure Hose Introduction:
Coal mine support high-pressure hose in carbon rod pool factory, steel ball factory, pulp factory, plexiglass product factory, connector factory, etc., are useful, involving salt mining; Soybean products manufacturing; Beer making; Metal crafts manufacturing; And so many industries. For mine hydraulic support, oil field development classification of high pressure steel wire braided tubing product specification range DN6mm ~ DN305mm. The inner and outer layers of the high pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) cross-braided steel wire or wound steel wire. The outer rubber layer of the hose is seriously deteriorated. In this case, the hose should be replaced. The hose is not broken but a lot of oil is leaking, the hose is leaking a lot of oil but not found to be broken, the reason is that when the hose passes through the high pressure liquid flow, the inner rubber is eroded and scraped until a large area of the steel wire layer leaks out resulting in a lot of oil. The use of high pressure hose is very wide, most commonly used in the automotive industry, construction machinery, lifting and transportation machinery of high pressure transmission and liquid transmission, can be used as high pressure paint special pipe.
Hydraulic Support High Pressure Hose Model:
Hydraulic Support High Pressure Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Hydraulic Support High Pressure Hose Factory:
Our company specializes in the sale of coal mine support high pressure hose, mining high pressure hose, construction machinery with high pressure hose, high pressure insulation soft hose, large diameter drilling high pressure hose, rotary drilling high pressure hose, quality assurance, rest assured trading.
Hydraulic Support High Pressure Hose FAQs:
What does high pressure hose 8ii-800 mean?
8II refers to two layers of eight, and 800 refers to a length of eight meters
How does the high pressure hose industry get out of the "cold winter" of raw material price increases?
The finished product also has to follow, there is no way, unless there is a lot of raw material reserves in the past, or there is no other way (in addition to changing the formula and cutting corners).
High-pressure hose model KJR6-600/700 letters and what do they mean?
The meaning of the letters and numbers is as follows: KJR stands for the hose is connected to the quick mining joint, 6 stands for the inner diameter of the hose is 6mm, 600/700 means the pressure is 600Mpa, and the length is 700mm. High pressure hose is used for hydraulic support in mine, oilfield development, engineering construction, lifting and transportation, metallurgy and forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and various industrial departments mechanized, automated hydraulic system to transport petroleum base with a certain pressure and temperature (such as mineral oil, soluble oil, hydraulic oil, fuel oil, etc.).
