Mining Support Hydraulic Hose Specification
Pubdate：2023-09-26 09:55 | Hits：
Mining Support Hydraulic Hose Specifictions:（Guide：Introduction→Model→Price→Factory→FAQs）
Mining Support Hydraulic Hose Introduction:
The high-pressure hose used in the support is useful in the electronic computer factory, power supply equipment factory, tobacco factory, vulcanized alkali factory, glue factory, etc., involving the manufacture of spray guns and similar appliances; Non-metallic mineral products industry; Household kitchen electric appliance manufacturing; Rubber parts manufacturing; And so many industries. The failure of the strengthening layer is mainly due to the effect of wet or corrosive substances on the layer, which weakens the strength of the hose and leads to rupture at high pressure. The calender is pressed into a laminated rubber sheet, and the spacer is added to roll and cut into a specified width according to the technical requirements. Therefore, there is no standard for this kind of hose in the national standards. The old engineers of some enterprises still use the old standards of the past, so some people still choose this model when designing. Do not twist the hose during installation. A slight twist on the hose may reduce its strength and loosen the joint, which should be tightened to the hose rather than the hose to the joint when assembling. With the implementation of China's offshore oil development strategy, the requirements of offshore oil exploitation on the performance of pipelines will continue to increase.
Mining Support Hydraulic Hose Model:
Mining Support Hydraulic Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Mining Support Hydraulic Hose Factory:
The company distributes high pressure hose with bracket, pulley mechanism grinding high pressure hose, high pressure flame retardant refractory hose, heat resistant high pressure hose, glue machine high pressure hose, food grade high pressure hose, business is very flexible, can be customized according to requirements.
Mining Support Hydraulic Hose FAQs:
What are the commonly used materials of high pressure hose?
The commonly used materials of steel wire high pressure hose are: butadiene adhesive (inner adhesive), butadiene, PVC, CPM (outer adhesive), steel wire, and rubber mixing are used: sulfur, accelerator, carbon black and so on.
Learn to make high pressure hose assembly?
The hose used in the production of high-pressure hose assembly must be inspected according to the corresponding technical standards to confirm whether it meets the performance indicators and use requirements of the hose assembly. Pay attention to the following aspects in the inspection. Specifications and actual deviations of the hose. Because the inner and outer diameter of the hose and the outer diameter of the skeleton layer will fluctuate, if the fluctuation range exceeds the allowable limit, it is impossible to ensure the balance of the pressure of the hose joint, and the quality of the hose assembly is difficult to ensure. Therefore, for the hose assembly production of the selected hose, should strictly check whether the inner diameter, skeleton layer of the outer diameter meets the requirements, the outer diameter deviation, the requirements can be appropriately relaxed.
High pressure hose assembly standard?
Please refer to JB/T 8727-2004 "Hydraulic hose Assembly", you have a look, I hope to help you.
