High Pressure Spiral Drilling Hose Specification
Pubdate：2023-09-27 09:56 | Hits：
High Pressure Spiral Drilling Hose Specifictions:（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Spiral Drilling Hose Introduction:
High-pressure winding drilling hose is useful in fluorescent material factory, calendar factory, entertainment, sports, stationery, toy factory (except metal, celluloid), pencil, brush, brush composition factory, motor vehicle repair factory, etc., involving culture and education, industrial beauty, sports and entertainment supplies manufacturing industry; Building ceramic products manufacturing; Fruit and nut processing; Brown products manufacturing; And so many industries. The poor sealing of the inner layer makes the high pressure oil easily enter the wire layer; Adhesive layer and wire layer adhesion is insufficient. When the hose must be bent, the bending radius should not be too small, and should be greater than 9 times the outer diameter. The joint of the hose and the joint shall have a straight line section greater than 2 times the outside diameter of the pipe. The hose was broken, the outer rubber layer was peeled and no rust was found in the reinforcing layer, but irregular broken wires appeared in the direction of the length of the reinforcing layer. The main reason is that the hose was subjected to high-frequency impact force. The main reason for this phenomenon is that the system pressure is too high, exceeding the pressure resistance of the hose. Failure at the rupture: the hose is broken at one or more places, the tear is neat, and other parts are maintained well.
High Pressure Spiral Drilling Hose Model:
High Pressure Spiral Drilling Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Spiral Drilling Hose Factory:
Hebei Tengshuo production of high pressure winding drilling hose, coal mine φ51 high pressure hose, fire retardant high pressure hose, sand blast high pressure hose, gas high pressure hose, high pressure hose, can be customized according to requirements.
High Pressure Spiral Drilling Hose FAQs:
The hydraulic pump on the coal mine is 35Mpa, with 10 two-layer high-pressure hose line?
No, generally two layers of steel wire hose suitable for use in the low pressure system, such a high pressure is best 4 layers, both ends of the pressure buckle to have technical assurance of the regular manufacturers to prevent safety accidents
