High Pressure Nylon Spiral Hose Types
Pubdate：2023-09-27 10:48 | Hits：
High Pressure Nylon Spiral Hose Specifictions:（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Nylon Spiral Hose Introduction:
Nylon wire winding high pressure hose is useful in machine tool factory, cement, cement and steel prefabrication factory (including ceramic and silicate prefabrication factory), match chip factory, dairy factory, soybean product processing plant, etc., involving natural plant fiber weaving handicraft manufacturing; Audio equipment manufacturing; Meat and poultry canning; Refractory products manufacturing; And so many industries. The hose is broken, and the braided steel wire near the break is rusty. The hose is broken, and the outer rubber layer is peeled off for inspection. Improper selection of the clamping amount and clamping speed during the assembly of the hose and the joint, or unreasonable selection of the structure, material and size of the joint, can lead to too tight or too loose pressure of the hose and the joint, resulting in early damage to the joint. When the hose is installed, it should avoid being in a tension state, even if there is no relative movement at both ends of the hose, it is necessary to keep the hose loose, and the tensioned hose will expand under pressure and reduce the strength. The inner layer glue, middle layer glue and outer layer glue are mixed by the mixer according to the formula. The inner tube is extruded by an extruder and coated on a soft or hard core coated with release agent (the liquid nitrogen freezing method also does not use the tube core). The higher the temperature of the oil, the easier the rubber is to age, the worse the elasticity, the lower the strength and sealing performance, and the hose will soon burst.
High Pressure Nylon Spiral Hose Model:
High Pressure Nylon Spiral Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Nylon Spiral Hose Factory:
Hebei Tengshuo distribution nylon wire wound high pressure hose, oil field ultra-high pressure hose, wool surface high pressure hose, high iron high pressure hose, high pressure wind cannon hose, water truck high pressure hose, quality and after-sales are guaranteed.
High Pressure Nylon Spiral Hose FAQs:
High pressure braided hose into coal mine requirements, need coal safety certificate? There is no coal safety certificate test report can be?
The inspection report must also be the explosion-proof inspection report and the explosion-proof inspection certificate issued by the inspection designated by the national safety standard, and those issued by other agencies are not recognized.
Type of high pressure hose joint?
The rubber hose joint is generally in terms of material: round steel, 45# steel, stainless steel, commonly used for: Type A, type C, type D hose assembly for the production process is: first remove the outer glue at both ends with the glue extractor, install the joint and then use the pipe shrink machine to clamp
High pressure hose KJ and DN how to distinguish?
For example, DN10 and KJ10, the diameter is the same, the size of the O-ring and the retaining ring DN is small, and it should be better to distinguish by comparison
