High Pressure Hose for Cement Grouting
Pubdate：2023-09-16 16:49 | Hits：
High Pressure Hose for Cement Grouting Models（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Hose for Cement Grouting Introduction:
High pressure hose for cement grouting is useful in anklet, insulator insulator factory, sawmill, wood integrated processing plant, gear material factory, sweater, yarn factory, oil pump nozzle factory, etc., involving information chemical manufacturing; Automobile body, trailer manufacturing; Food manufacturing; Manufacture of special equipment for environmental protection; And so many industries. Or has been along the wire layer to a place to accumulate, so that the outer layer of rubber to produce a bulge or even break. When assembling the hose and the joint, if the clamping speed is too fast, it is easy to cause damage to the inner glue and fracture of the steel wire layer, so that the hose is damaged prematurely in use. The structure of high pressure steel wire braided hose is mainly composed of liquid resistant synthetic rubber inner layer, middle rubber layer, Ⅰ, Ⅱ, Ⅲ layer of steel wire braided layer and weather-resistant synthetic rubber outer layer. Vulcanization by canister or salt bath. The outer rubber layer of the hose is seriously deteriorated. In this case, the hose should be replaced. Hose layout should be as far away from the performance of the engine exhaust pipe as possible to avoid heat sources. If necessary, devices such as bushing or protective screen can be used to prevent the hose from deteriorating due to heat.
High Pressure Hose for Cement Grouting Model:
High Pressure Hose for Cement Grouting Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Hose for Cement Grouting Factory:
Hebei Tengshuo distribution cement grouting high pressure hose, steel wire special high pressure hose, wet spray machine high pressure hose, coal mine high pressure hose, heavy truck high pressure hose, steel wire textile winding high pressure hose, quality and after-sales are guaranteed.
High Pressure Hose for Cement Grouting FAQs:
What causes the steel wire to break when the high pressure hose locks?
The inner and outer diameters of the joint clamping sleeve and the high pressure hose are inconsistent, and the selection is wrong. The joint is not properly fastened when clamping, and excessive clamping leads to too tight clamping leading to internal fracture of the steel wire, resulting in overall fracture after a period of high pressure work. Without the above situation, it is possible to reject the high pressure hose.
How big is the hose for the 185 cable?
The hose should be the same as the steel pipe model, if only the hose, 3*185 low voltage cable with Φ70 or 80 hose, high voltage cable with Φ100 or 125 hose.
What kinds of hose joints are divided into:
The general classification of joints are: expansion joints, quick joints, buckle joints, removable joints, sleeve joints, flaring joints are welded joints. Generally, we have a look at the joint classification first. It is divided into A/ B/ C/ D/ F/ G/ H/ K/A/ plane seal type, B/ type is a sleeve type joint, and 24 degrees c type match, C/ minutes 24.60. And 74 degrees; In turn, it is matched with 24 degrees g type, type and 74 degrees g type, D/ is a spherical sealing type and F/ is a disc type joint G/ 3 kinds, respectively 24, 60, and 74 degrees, and the same degree c type is sealed.
