Fabric Reinforced High Pressure Hose Models
Pubdate：2023-09-16 08:53 | Hits：
Fabric Reinforced High Pressure Hose Models（Guide：Introduction→Model→Price→Factory→FAQs）
Fabric Reinforced High Pressure Hose Introduction:
Fabric high-pressure hose is useful in ferroalloy factory, air gun factory, entertainment, sports, stationery, toy factory (except metal, celluloid), table tennis factory, fountain pen factory, etc., involving mining auxiliary activities; Polyester fiber manufacturing; Light and small lifting equipment manufacturing; Coal products manufacturing; And so many industries. During construction machinery operation, the hydraulic system heats the oil due to power loss, and the influence of external temperature (especially in summer) can make the oil temperature rise sharply. High pressure hose often have these types: fiber reinforced polyurethane hose, fiber reinforced nylon hose, wire reinforced polyurethane hose, wire reinforced nylon hose, wire wound resin hose, food grade hose. Do not twist the hose during installation. A slight twist on the hose may reduce its strength and loosen the joint, which should be tightened to the hose rather than the hose to the joint when assembling. Type: 4SP - medium pressure hose with four layers of wire wound. Oil drilling hose structure: inner rubber layer, inner rubber protective layer, medium rubber layer, wire winding layer and outer rubber layer.
Fabric Reinforced High Pressure Hose Model:
Fabric Reinforced High Pressure Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Fabric Reinforced High Pressure Hose Factory:
We produce fabric high pressure hose, and fire retardant steel wire high pressure hose, high pressure and high temperature hose, high-pressure oil hose for construction machinery, high pressure acid resistant rubber hose, boiler high pressure hose with reliable quality and reasonable price.
Fabric Reinforced High Pressure Hose FAQs:
Does the high pressure shake when you add air-conditioning fluid?
The state of the air conditioning system pipeline in the refrigerant filling process is "unsteady", and the corresponding air conditioning compressor exhaust pressure fluctuation is a normal phenomenon. If the exhaust pressure produces too much jitter under normal operation, it may be because there is too much air mixed in the system pipeline or other types of reasons. When filling refrigerant, the air inside the hose should be discharged clean in advance.
High pressure hose assembly KJR3-19-24/2400 What is the meaning?
The rubber inside the hose is 19mm, the 3-layer steel wire braided hose,24 is the working pressure is 24MPa,2400 refers to the length of the hose assembly is 2.4 meters, KJR refers to the national standard of the joint K type. The company's technical staff plant a large number of processing of this pipe every day, do not understand can ask again.
Hydraulic hose crimping method. How to calculate the crimping size?
With a diameter of 19mm four-layer steel hose (Italian manuli4sp standard), the outer diameter of the 19mm four-layer steel hose joint obtained from the hydraulic tubing clamping parameter table is 37mm before clamping, and 33.5mm after clamping. The inner diameter of the mold should be selected with a diameter of 33mm, and the corresponding micrometer scale is 3. Install the 33mm mold on the mold base, and turn the micrometer scale to 3, and assemble the rubber hose with the joint after peeling. After the buckle is completed, the outer diameter of the joint jacket is measured by the buckle value of 33.5mm in the buckle parameter table, then the buckle is completed.
