High Pressure Hose for Nitrogen Production Unit
Pubdate：2023-09-16 11:03 | Hits：
High Pressure Hose for Nitrogen Production Unit Models（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Hose for Nitrogen Production Unit Introduction:
High pressure hose of nitrogen production device is useful in science and education model factory, gear factory (milling tooth factory), microwave communication equipment factory, chemical and petroleum equipment factory, building decoration hardware factory, etc., involving Marine supporting equipment manufacturing; Manufacture of artificial crude oil; Ship conversion and dismantling; Cosmetics manufacturing; And so many industries. When replacing the high-pressure hose, the length of the hose, the number of steel wire layers, the shape and size of the joint should be reasonable, and the bending degree of the hose should be minimized. Type R12 - Four layers of wire wrapped around high temperature medium pressure tubing under harsh conditions. The extruder is again coated with the outer layer of rubber, and then wrapped with lead or cloth vulcanization protective layer. It is used in mine hydraulic support, oilfield development, engineering construction, lifting and transportation, metallurgy and forging, mining equipment, ships, injection molding machinery, agricultural machinery, various machine tools and mechanization of various industrial departments. The inner and outer layers of the high pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) cross-braided steel wire or wound steel wire.
High Pressure Hose for Nitrogen Production Unit Model:
High Pressure Hose for Nitrogen Production Unit Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Hose for Nitrogen Production Unit Factory:
Our factory produces nitrogen high-pressure hose, explosion-proof high-pressure hose, clamp high-pressure hose, high-pressure food grade silicone hose, injection molding machine high-pressure hose, liquefied gas gas high-pressure hose, and various types of high-pressure hose assembly to meet your needs.
High Pressure Hose for Nitrogen Production Unit FAQs:
Hose specifications 6mm*10mm what is the meaning?
Denotes a hose with an inner diameter of 6mm, an outer diameter of 10mm and a wall thickness of 2mm. In addition to this, you also need to pay attention to the material, which is important for use.
00210-12 sleeve with what specifications of high pressure hose?
High-pressure hose, sleeve, hose fittings are corresponding, 00210-12 sleeve with 12 (3/4 inch, because the inch is hexadecimal, so the inch ratio is 04 corresponding to 1/4,05 corresponding to 5/16, and so on) hose, 12 hose fittings; The connection nut depends on whether it is the British system or the metric system or the American system, the British system depends on the code, the metric system depends on the thread code inside the code, and the American system depends on the joint code
At what temperature does the high-pressure hose work?
The high-pressure hose is mainly composed of an inner rubber layer, two or four or six layers of wire winding layer and an outer rubber layer. High pressure hose mainly works at temperature: -40℃-+100℃, so you must master the temperature, do not use improperly, bring you unnecessary consequences.
