High Pressure Steel Wire Spiral Hose Specification
Pubdate：2023-09-26 16:39 | Hits：
High Pressure Steel Wire Spiral Hose Specification:（Guide：Introduction→Model→Price→Factory→FAQs）
High Pressure Steel Wire Spiral Hose Introduction:
Steel wire textile winding high pressure hose is useful in knitting factory, air conditioner factory, labor protection supplies factory, powder metallurgy factory, quilt factory, etc., involving nylon fiber manufacturing; Manufacturing of graphite and non-metallic mineral products; Feather (velvet) processing and product manufacturing; Television manufacturing; And so many industries. If the amount of pressure is too large, the joint and the hose are too tight, which can easily lead to local damage to the inner layer of the hose, resulting in cracks, and the high-pressure oil will enter the wire layer directly from the rupture, and then squirt out to the tail of the jacket along the gap between the wires. Where the hose must be crossed or where there may be friction with the mechanical surface when working, protective devices such as hose clamps or springs should be applied to avoid damage to the outer layer of the hose. High pressure steel wire braided hose use: high pressure steel wire reinforced hydraulic tubing is mainly used in mine hydraulic support, oil field development, suitable for engineering construction, lifting and transportation, metallurgy and forging, mining equipment. In short, the manufacture of high-pressure tubing uses more equipment, more types of raw materials, and the production process is complex. Therefore, there is no standard for this kind of hose in the national standards. The old engineers of some enterprises still use the old standards of the past, so some people still choose this model when designing.
High Pressure Steel Wire Spiral Hose Model:
High Pressure Steel Wire Spiral Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
High Pressure Steel Wire Spiral Hose Factory:
The company sells steel wire textile wound high pressure hose, fabric high pressure hose, flange type high pressure hose, wound high pressure hose, high pressure fire retardant hose, construction machinery special high pressure hose, high pressure hose assembly, to meet your needs.
High Pressure Steel Wire Spiral Hose FAQs:
Does the high pressure pipe of the car have a relationship with the water temperature?
There are many reasons for the high water temperature. 1, one is the blockage of the water tank, this phenomenon is because in long-term use, there is no regular replacement of the cooling water, so that the rusty material inside the engine falls off, the water cycle is stuck in the heat pipe of the water tank, long-term so, it will block the water tank, resulting in poor circulation, and the water temperature is high; 2, there is a thermostat failure, can not open or incomplete open caused by poor cooling water circulation; 3, electronic fan does not turn, or slow speed is also a reason. Do not turn may be a fuse blown or the electronic fan carbon brush contact is poor, slow speed may be the carbon brush wear too serious. 4, some cars pump by the belt drive, if the belt is broken will not turn
