Mining Support High Pressure Hose Specification
Pubdate：2023-09-26 09:47 | Hits：
Mining Support High Pressure Hose Specifictions:（Guide：Introduction→Model→Price→Factory→FAQs）
Mining Support High Pressure Hose Introduction:
Coal mine support high pressure hose in low-voltage electrical equipment factory, artificial leather factory, quarry factory, waste processing plant, singing machine factory, etc., are useful in the scene, involving aerospace manufacturing; Rare earth metal rolling processing; Manufacture of special instruments for geological exploration and earthquake; Baked goods manufacturing; And so many industries. The inner layer glue, middle layer glue and outer layer glue are mixed by the mixer according to the formula. The inner tube is extruded by an extruder and coated on a soft or hard core coated with release agent (the liquid nitrogen freezing method also does not use the tube core). Or has been along the wire layer to a place to accumulate, so that the outer layer of rubber to produce a bulge or even break. When assembling the hose and the joint, if the clamping speed is too fast, it is easy to cause damage to the inner glue and fracture of the steel wire layer, so that the hose is damaged prematurely in use. High pressure steel wire braided hose specification range: DN5mm ~ DN102mm. The main reason for this phenomenon is that the system pressure is too high, exceeding the pressure resistance of the hose. When the hose is installed, it should avoid being in a tension state, even if there is no relative movement at both ends of the hose, it is necessary to keep the hose loose, and the tensioned hose will expand under pressure and reduce the strength.
Mining Support High Pressure Hose Model:
Mining Support High Pressure Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Mining Support High Pressure Hose Factory:
Our company specializes in coal mine bracket high pressure hose, screw joint high pressure hose, sprayer high pressure hose, high pressure hose, high pressure Marine oil hose, high pressure cloth hose, and strive to meet the needs of users.
Mining Support High Pressure Hose FAQs:
High pressure hose DN10-40/L=500 What does it mean?
Inner diameter 10 Working pressure 40MPA, length 500
Where is the origin of Hebei high pressure hose?
Hebei is the origin of high pressure hose in the north, mainly in Hengshui.
Can the pump be loaded with high pressure?
It is completely possible to convert an ordinary air cylinder into a high-pressure air cylinder, and a high-pressure gas storage chamber must be prepared, and a single intake valve needs to be installed between the gas storage chamber and the air cylinder. In the general sense, the high-pressure pump is one more gas storage chamber than the ordinary pump.
