Rotary Drilling Hose Specification
Pubdate：2023-09-27 16:40 | Hits：
Rotary Drilling Hose Specification:（Guide：Introduction→Model→Price→Factory→FAQs）
Rotary Drilling Hose Introduction:
Drilling high-pressure hose in hydrogen plant, brown rope factory, ball factory (leather as raw material), waste fiber processing plant, cable manufacturing plant, and other scenarios are useful, involving compound fertilizer manufacturing; Limestone and gypsum mining; Electronic device manufacturing; Construction stone processing; And so many industries. Failure at the rupture: the hose is broken at one or more places, the tear is neat, and other parts are maintained well. Shallow sea submarine oil pipelines have been produced in China, but floating or semi-floating oil pipelines and deep-sea submarine oil pipelines still rely on imports. The extruder is again coated with the outer layer of rubber, and then wrapped with lead or cloth vulcanization protective layer. Automatic hydraulic system transport with a certain pressure and temperature of petroleum-based (such as mineral oil, soluble oil, hydraulic oil, fuel oil, lubricating oil) and water-based liquid (such as emulsion, oil-water emulsion, water) and liquid transmission pipeline. Type R12 - Four layers of wire wrapped around high temperature medium pressure tubing under harsh conditions.
Rotary Drilling Hose Model:
Rotary Drilling Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Rotary Drilling Hose Factory:
The company produces drilling high pressure hose, high pressure cleaning special hose, clamp wire high pressure hose, characteristic steel wire wound high pressure hose, steel armouring high pressure hose, high pressure mining hose, quality assurance, rest assured trading!
Rotary Drilling Hose FAQs:
How to strip the inner glue of high pressure hose?
The inner layer glue, middle layer glue and outer layer glue are mixed by the mixer according to the formula. Extrude the inner rubber hose with an extruder, and cover the soft core or hard core coated with release agent (liquid nitrogen freezing method can also use no tube core); The calender is pressed into a laminated rubber sheet, and the spacer is added to roll and cut into a specified width according to the technical requirements; The inner layer of hose containing the tube core is wound on the winding machine or braiding machine with copper-coated steel wire or copper-coated steel wire rope, while the middle layer of rubber sheet is synchronically wound between each two layers of copper-coated steel wire or copper-coated steel wire rope in the winding machine or braiding machine, and the beginning and end of the winding steel wire are bundled (some early winding machines need to prestress the copper-coated steel wire in advance).
