Steel Wire Braided High Pressure Rubber Hose Test Standard
Pubdate：2023-09-19 09:00 | Hits：
Steel Wire Braided High Pressure Rubber Hose Test Standard:（Guide：Introduction→Model→Price→Factory→FAQs）
Steel Wire Braided High Pressure Rubber Hose Introduction:
Steel wire woven rubber high-pressure hose in gem bearing factory, rubber, plastic machinery manufacturing repair factory, urn, ashes box factory, gear factory (milling plant), fire equipment factory, etc., are useful in the scene, involving entertainment equipment and entertainment supplies manufacturing; Manufacturing of special accessories for household electric appliances; Woven garment manufacturing; Basic chemical raw material manufacturing; And so many industries. Torsion occurs at the rupture of the hose, the reason for this phenomenon is that the hose is caused by excessive torsion during installation or use. Failure of the outer rubber layer: there are cracks on the surface of the hose, and the main reason for the cracks on the surface of the hose is that the hose is bent in a cold environment. The amount of deformation (elongation, shortening or bending deformation) of the hose after pressure is large; The poor air tightness of the outer rubber causes corrosion of the steel wire. The inner and outer layers of the high pressure hose wall are oil-resistant rubber, and the middle is (2 to 4 layers) cross-braided steel wire or wound steel wire. The hose is broken, and the braided steel wire near the break is rusty. The hose is broken, and the outer rubber layer is peeled off for inspection.
Steel Wire Braided High Pressure Rubber Hose Model:
Steel Wire Braided High Pressure Rubber Hose Price:
You can consult Hebei Tengshuo company, we will make a reasonable quotation according to your requirements.
Steel Wire Braided High Pressure Rubber Hose Factory:
The company engaged in steel wire preparation rubber high pressure hose, automotive high pressure hose, high pressure plastic hose, mining steel wire wound high pressure hose, high pressure temperature hose, high pressure car wash hose. Focus on quality, affordable price.
Steel Wire Braided High Pressure Rubber Hose FAQs:
Gas stove joint is a pagoda can be dropped directly connected to the bellows joint:
The hose can be used only when the thread and sealing form of the two are the same. The pagoda shaped joint of the hose gas stove is a terminal joint used for connecting the hose with the equipment. It is only one of the many converters used in the gas interface of the gas appliance and the user's pipeline connection, and the gas interface of the household gas appliance (the interface connecting the terminal connector) must be one of the three kinds of 55° sealed pipe thread cylindrical internal thread and cone external thread, 55° sealed pipe thread cone internal thread and cone external thread, and 55° unsealed pipe thread.
What recycled rubber is suitable for high pressure hose?
High pressure hose is mainly divided into the following three types: 1. Wire wound hose. 2. Wire braided hose. 3. Oil drilling hose. Among them, the steel wire winding hose and the steel wire braided hose mainly have high tension on the recycled rubber, and the oil resistance of the oil drilling hose on the recycled rubber is relatively high. In the actual production, many manufacturers use recycled rubber to reduce costs, and the three kinds of hose should be produced with high-strength recycled rubber and nitrile recycled rubber according to different needs.
